Clinical longevity of metallic versus fiberglass intraradicular posts: a systematic review / Longevidade clínica de pinos intraradiculares metálicos versus de fibra de vidro: uma revisão sistemática

Objective: This systematic review aims to compare the clinical longevity of metallic and fiberglass intraradicular posts in teeth with severely compromised crowns, utilizing randomized clinical trials and case reports published in the last eleven years. Material and Methods: The research was conducted on PubMed, Medline, Lilacs, and BBO databases using the first search strategy with the descriptors 'dental posts,' 'longevity,' 'fiberglass-reinforced posts' or 'metallic posts.' The second search strategy involved analyzing the references of articles identified by the first search. Both studies were carried out with stringent inclusion and exclusion criteria. Results: No statistically significant and clinically relevant differences in longevity were observed between metallic and fiberglass posts. Conclusion: The clinical success and durability of the restorative procedure using intraradicular posts primarily depend on the remaining amount around the post (ferrule), the type and position of the tooth in the arch (impacting the masticatory forces exerted on the restored tooth), and the correct application of the cementation technique. It is noteworthy that fiberglass posts offer substantial advantages by presenting a modulus of elasticity similar to dental structure, ensuring a more homogeneous distribution of masticatory forces and reducing the risk of fractures. These findings have practical implications for material selection in restorative procedures involving intraradicular posts.(AU)

Objetivo: Esta revisão sistemática visa comparar a longevidade clínica de pinos intrarradiculares metálicos e de fibra de vidro em dentes com coroas severamente comprometidas, através de estudos clínicos randomizados e relatos de casos, publicados nos últimos onze anos. Material e Métodos: A pesquisa foi conduzida nas bases de dados PubMed, Medline, Lilacs e BBO, utilizando a primeira estratégia de busca com os s 'pinos dentais' e 'longevidade' e 'pinos reforçados com fibra de vidro' ou 'pinos metálicos'. A segunda estratégia de busca consistiu na análise das referências dos artigos identificados pela primeira estratégia. Ambos os estudos foram delineados com critérios rigorosos de inclusão e exclusão. Resultados: Não se constataram diferenças estatisticamente significativas e clinicamente relevantes na longevidade entre pinos metálicos e de fibra de vidro. Conclusão: O êxito clínico e a durabilidade do procedimento restaurador empregando pinos intrarradiculares dependem primordialmente da quantidade de remanescente ao redor do pino (férula), do tipo e posição do dente na arcada (o que impacta nas forças mastigatórias exercidas sobre o dente restaurado) e da aplicação correta da técnica de cimentação.Destaca-se que o pino de fibra de vidro oferece vantagens substanciais ao apresentar módulo de elasticidade similar à estrutura dentária, assegurando uma distribuição mais homogênea das forças mastigatórias e reduzindo o risco de fraturas (AU)

Effect of dentin moisture on the adhesive properties of luting fiber posts using adhesive strategies

Abstract The purpose of this study was to evaluate the effect of dentin moisture (moist and dry) on the bonding of fiber posts to root dentin with different adhesive strategies (etch-and-rinse, self-etch, and self-adhesive). Seventy-two extracted single-rooted human teeth were endodontically treated and divided into six groups (n = 12) according to the moisture of dentin surface and adhesive systems as follows: a) etch-and-rinse/moist, b) etch-and-rinse/dry, c) self-etch/moist, d) self-etch/dry, e) self-adhesive/moist, and 6) self-adhesive/dry. The specimens were sectioned into six slices for push-out bond strength (BS), nanoleakage (NL) by SEM, and Vickers microhardness (VHN) of the resin cement. A universal testing machine (AG-I, Shimadzu Autograph) was used at a crosshead speed of 0.5 mm/min until post extrusion, with a load cell of 50 kg for evaluation of the push-out strength. Data on BS, NL, and VHN were evaluated by two-way ANOVA and Tukey's test (α = 0.05). Dentin moisture as the main factor was not significantly different for the push-out test. However, higher BS values can be observed for the etch-and-rinse group. A lower percentage of NL was found in the dry dentin groups. The moisture pattern was not significant in the hardness values for the pre-etching groups. Additional moisture did not increase the evaluated properties.

Survival of severely compromised endodontically treated teeth restored with or without a fiber glass post

Abstract Objective The use of a fiber glass post (FGP) type and choice of FGP diameter to restore endodontically treated incisors without ferrule is controversial. This study evaluated survival rate and failure mode of severely compromised central incisors without ferrule rehabilitated using resin-based composite (RBC) with or without FGP with different diameters. Methodology A total of 60 decoronated bovine incisors without a ferrule were endodontically treated and prepared for 1.4, 1.6, and 1.8 mm diameter FGPs (Whitepost System DC 0.5, Fit 0.4, and DCE 0.5; FGM). Half of the teeth received FGPs cemented using dual-cure resin cement (Allcem Core; FGM), the other half were filled using only bulk-fill RBC (OPUS Bulk Fill; FGM). The crowns were directly restored with RBC. The roots were embedded in polystyrene resin and the periodontal ligament was simulated with polyether impression material. Fatigue testing was conducted under 5 Hz cyclic loading at 30 degrees to the incisal edge, beginning at 50 N (5,000 cycles) as a warmup. After, the load was increased 100 N every 15,000 cycles until fracture occurred. All specimens were subjected to transillumination, micro-CT analysis, and digital radiography before and after fatigue testing. Fracture mode was classified according to severity and repair potential. Data were analyzed with Kaplan-Meier survival test and post hoc log-rank test (α=0.05) for pairwise comparisons. Results Using FGP significantly increased the number of cycles to failure, irrespective of FGP diameters (p=0.001). The FGP diameters had no statistically significant effect on cycles to failure or failure mode. Conclusion Using FGP without ferrule improved survival rate of structurally severely compromised central incisors compared with rehabilitation without FGP. The diameter of the FGPs had no effect on the survival rate and failure mode.

The three-dimension finite element analysis on mandibular first molar restored with different designed fiber post-core and all ceramic crown / 中国医师杂志

Objective:To evaluate the effect of different numbers and location of fiber post on stress distribution of fiber post-all-ceramic crown restored mandibular first molar, with application of finite element method.Methods:Intact human mandibular first molars were used to build three-dimensional finite element models, restored with fiber post core and all ceramic crown. Three-dimension finite element model with 7 different post designs(according to the numbers and location of fiber post inserted into root canal) were created with soft wares of Mimics, Geomagic and Ansys. The von Mises criterion was applied for comparing the maximum von Mises stress value of dentin and stress concentration areas in 7 models maximum load (F1, 225 N), vertical load (F2, 225 N), inclined load (F3, 225 N) and horizontal load (F4, 225 N).Results:Under maximum load, vertical load, inclined load and horizontal load, the maximum von Mises stress value of dentin were 21.854-22.629 MPa (F1), 20.945-21.369 MPa (F2), 21.637-22.513 MPa (F3) and 37.922-38.277 MPa (F4), when the mandibular first molar defect was restored with fiber post core and all ceramic crown. There was little difference in maximum von Mises stress values and stress distribution among the 7 groups. Increasing the number of Posts has no significant effect on the stress distribution of the original post. The maximal Von Mises stress on dentine increased when the horizontal direct loads increased.Conclusions:The number and location of posts have little influence on maximum stress values and stress distribution, when the mandibular first molar defect was restored with fiber post core and all ceramic crown.

Fiberglass versus cast metal posts: a practical review based on mechanical properties / Pinos de fibra de vidro versus metal fundido: uma revisão prática baseada em propriedades mecânicas

The current review aimed to compare the mechanical properties and clinical behavior of fiberglass and cast metal posts. It included in-vitro studies, finite element analysis, clinical studies, and systematic reviews that evaluated fiberglass and metal posts with reliable methodologies. The reports in the literature diverge on tooth failure modes and stress distributions in the root according to different posts. Investigations suggest that fiberglass posts are preferable because their elastic modulus is similar to dentin. Other studies mention that the flexibility of fiber posts may damage the interface. The fracture load values of different studies could not be compared. The presence of a ferrule seems beneficial. Cast metal posts provide higher characteristic strength to the set but with more unfavorable failures. Intraradicular posts with a lower elastic modulus produce more stress between the cement layer and dentin. In conclusion, fiberglass and cast metal posts can be used with a ferrule. Cast metal posts seem more appropriate for weakened teeth. The presence of a ferrule benefits the system. Weakened teeth tolerate higher loads when restored with cast metal posts, but when these posts fail, the only solution is tooth extraction. Clinical follow-ups cannot yet detect differences between the survival rates of intraradicular fiberglass and cast metal posts (AU)

O objetivo da presente revisão foi comparar as propriedades mecânicas e o comportamento clínico de pinos de fibra de vidro e núcleos metálicos fundidos. Estudos laboratoriais, analise por elementos finitos, estudos clínicos e revisões sistemáticas que avaliaram pinos de fibra de vidro e metálicos, com metodologia confiável foram selecionados. A literatura mostra-se bastante controversa sobre os modos de falha do dente e a distribuição de tensões na raiz de acordo com diferentes tipos de pinos. Algumas investigações sugerem que pinos de fibra de vidro são preferíveis porque seu módulo de elasticidade é semelhante ao da dentina, enquanto outras mencionam que a flexibilidade do pino de fibra pode ser prejudicial à interface adesiva. Os valores de carga de fratura em diferentes estudos não podem ser comparados. A presença de férula é benéfica. O núcleo metálico fundido resulta em maior resistência característica do conjunto, mas falhas mais desfavoráveis. Também, pinos com menor módulo geram mais tensão entre a camada de cimento e a dentina. Em conclusão, verificou-se que tanto pino de fibra de vidro como núcleo metálico fundido podem ser utilizados quando a férula está presente. Os núcleos metálicos fundidos parecem ser mais indicados para dentes fragilizados. É evidente que a presença de férula é benéfica para o sistema. Dentes fragilizados toleram cargas maiores quando restaurados com núcleos metálicos fundidos; porém, quando falham, a única solução é a extração do dente. Os acompanhamentos clínicos ainda não são capazes de detectar diferença entre as taxas de sobrevivência dos pinos de fibra de vidro e núcleos metálicos (AU)

Novo sistema de retentor pré-fabricado perfurado e de iluminador em fibra óptica: estudo da resistência mecânica frente a variação dos cimentos resinosos / New system of hollow prefabricated post and optical fiber illuminator: study of the mechanical strength by varying resin cements

O presente estudo teve por objetivo avaliar a resistência à flexão de um pino experimental de fibra de vidro vazado, e a resistência adesiva entre este pino experimental à dentina radicular, associando a utilização de um dispositivo iluminador em fibra óptica, sob o processo de envelhecimento, além de determinar a distribuição de tensão pela Análise de Elementos Finitos (FEA). O pino experimental e o dispositivo iluminador de fibra óptica têm por finalidade aumentar a efetividade de fotoativação dos cimentos resinosos nos terços médios e apicais dos canais radiculares. Para o teste de flexão de 3 pontos, estritamente do pino de fibra de vidro, as amostras foram divididas em 4 grupos (n=10): pino convencional (pc), pino experimental sem preenchimento (pp), com preenchimento de cimento resinoso (ppc) e com preenchimento de fibra óptica (ppf). Para o teste de resistência adesiva Pull-out, 100 raízes de dentes bovinos foram restauradas com retentores intrarradiculares e coroas de resina composta, distribuídos em 10 grupos (n=10), tendo como variáveis: o tipo de pino de fibra de vidro [convencional (C) ou perfurado (P)], o sistema de fotoativação [com ou sem o iluminador de fibra óptica (O)], o tipo de cimento resinoso [fotoativado (F) ou polimerização dual (D)] e o envelhecimento das amostras [com e sem ciclagem mecânica (C)]. O processo de envelhecimento foi realizado através da ciclagem mecânica e as amostras foram submetidas ao teste de resistência adesiva Pull-out. A análise do modo de falha foi realizada em Estereomicroscópio. A Análise em Elementos Finitos avaliou a distribuição de tensão pela análise de von Mises, deformação total e tensão máxima principal no Software Ansys 19.3. A análise estatística foi constituída pelo teste de normalidade Shapiro-Wilk, análise de variância (ANOVA) 1, 2 e 3 fatores e teste Tukey 5%. As médias e desvios padrão de resistência à flexão foram (MPa): pc = 677 ± 81,1; ppc = 419 ± 23,2; ppf = 200 ± 32,5 e pp = 177 ± 32,8. As médias e desvios padrão de resistência adesiva foram (MPa): CD = 12,2 ± 1,21; PD = 11,1 ± 1,32; PF = 10,9 ± 1,29; POD = 13,7 ± 1,16; POF = 11,9 ± 1,48; CDC = 10,1 ± 1,33; PDC = 9,25 ± 1,11; PFC = 8,37 ± 1,25; PODC = 10,8 ± 0,95 e POFC = 9,82 ± 1,02. Os resultados do modo de falha foram: adesiva entre pino e cimento (56%), mista predominantemente adesiva entre cimento e dentina (22%), adesiva entre cimento e dentina (14%) e a mista predominantemente adesiva entre pino e cimento (8%). Concluiu-se que entre os pinos experimentais, o grupo do pino perfurado preenchido com cimento resinoso obteve o maior valor de resistência à flexão, a utilização do dispositivo iluminador aumentou os resultados de resistência adesiva nos grupos dos pinos perfurados e não houve diferença na distribuição de tensões entre os grupos. (AU)

The present study aimed to evaluate the flexural strength of an experimental hollow glass fiber post, and the bond strength between this experimental post and root dentin, associating the use of an optical fiber illuminating device, under the aging process, in addition to determine the stress distribution by Finite Element Analysis (FEA). The experimental post and optical fiber illuminating device are intended to increase the polymerization effectiveness of resin cements in the middle and apical regions of root canals. For the 3-point bending test, strictly of the fiber post, the samples were divided into 4 groups (n=10): conventional post (pc), experimental post without filling (pp), with resin cement filling (ppc) and with optical fiber filling (ppf). For the Pull-out test, 100 roots of bovine teeth were restored with intraradicular retainers and composite resin crowns, distributed into 10 groups (n=10), with the following variables: glass fiber post type [conventional (C) or hollow (P)], the photocuring system [with or without the optical fiber illuminating device (O)], the type of resin cement [light cured (F) or dual cured (D)] and aging of the samples [with and without mechanical cycling (C)]. The aging process was performed by mechanical cycling and the samples were submitted to the Pull-out bond strength test. Failure mode analysis was performed using a stereomicroscope. Finite Element Analysis evaluated the stress distribution by von Mises analysis, total strain and maximum principal stress in Ansys Software 19.3. Statistical analysis consisted of the Shapiro-Wilk normality test, 1-, 2- and 3-way analysis of variance (ANOVA) and Tukey test 5%. The means and standard deviations of flexural strength were (MPa): pc = 677 ± 81.1; ppc = 419 ± 23.2; ppf = 200 ± 32.5 and pp = 177 ± 32.8. The means and standard deviations of bond strength were (MPa): CD = 12.2 ± 1.21; PD = 11.1 ± 1.32; PF = 10.9 ± 1.29; POD = 13.7 ± 1.16; POF = 11.9 ± 1.48; CDC = 10.1 ± 1.33; PDC = 9.25 ± 1.11; PFC = 8.37 ± 1.25; PODC = 10.8 ± 0.95 and POFC = 9.82 ± 1.02. The failure mode results were: adhesive between post and cement (56%), mixed predominantly adhesive between cement and dentin (22%), adhesive between cement and dentin (14%) and mixed predominantly adhesive between post and cement (8 %). It was concluded that among the experimental posts, the hollow post group filled with resin cement obtained the highest flexural strength value, the use of the illuminating device increased the results of bond strength in the hollow post groups and there was no difference in the stress distribution among the groups (AU)

Techniques for removing root canal posts: an vitro study / Técnicas para remoção de pinos intrarradiculares: um estudo in vitro

Objetivo: O objetivo deste estudo foi responder qual é a melhor técnica para remoção de pinos de fibra de vidro e pinos metálicos fundidos considerando tempo, preservação da estrutura dentária e custos. Métodos: Foi realizado um estudo in vitro, randomizado e cego. Sessenta dentes tratados endodonticamente foram randomizados em dois grupos de acordo com o tipo de pino. Uma segunda randomização foi realizada para cada tipo de técnica de remoção (ultrassom, broca ou combinada; n=10). One-way ANOVA foi usado para comparar o tempo de remoção do pino, teste t pareado comparou a quantidade de estrutura dentária removida e Kruskal Wallis seguido pelo teste post hoc de Mann-Whitney foram usados para análise de custo (P = 0,05). Resultados: Não houve diferença no tempo de remoção do pino considerando o tipo ou técnica do pino (P=0,630). A perda média de estrutura dentária na região cervical foi superior a 30% quando apenas uma ponta diamantada foi usada para remover pino de fibra de vidro (P<0,00001) e pino metálico fundido (P=0,008). Conclusão: De acordo com os resultados deste estudo, podemos concluir que a seleção da técnica de remoção dependerá da habilidade do operador, e sempre ocorrerá alguma perda de estrutura dentária, embora seja esperada uma perda maior quando apenas pontas diamantadas são usadas para este fim.(AU)

Objective: The aim of this study was to answer which is the best technique to removing glass fiber post and cast metal post considering time, preservation of tooth structure, and costs. Methods: An in vitro, randomized, blinded study was conducted. Sixty endodontically treated teeth were randomized into two groups according to post type. A second randomization was performed for each type of removal technique (ultrasound, drill, or combined; n=10). One-way ANOVA was used to compare the time to post removal, paired t-test compared the amount of tooth structure removed and Kruskal Wallis followed by post hoc Mann-Whitney test were used for cost analysis (P=0.05). Results: There was no difference in post removal time considering post type or technique (P=0.630). The average loss of tooth structure in the cervical region was greater than 30% when only a diamond bur was used to remove fiber glass post (P<0.00001) and cast metal post (P=0.008). Conclusion: According to the results of this study, we can conclude that the selection of the removal technique will depend on the skill of the operator, and some loss of tooth structure will always occur, although greater loss is expected when only diamond burs are used for this purpose.(AU)

Pinos de fibra de vidro ­ aspectos gerais, propriedades e considerações biomecânicas ­ uma revisão de literatura / Fiberglass posts ­ general aspects, properties, and biomechanical considerations ­ a literature review

Introdução: A dentística a cada dia demonstra grandes avanços nas técnicas e materiais, sendo eles aplicados de forma a preservar a estrutura dentária. Neste sentido, os pinos de fibra de vidro (PFVs) se destacam como uma alternativa de pinos intrarradiculares para a reabilitação de dentes endodonticamente tratados com perdas estruturais superiores a 50%. Objetivo: Realizar uma revisão de literatura sobre os pinos de fibra de vidro enfatizando seus aspectos gerais, propriedades e considerações biomecânicas. Materiais e métodos: Realizou-se uma revisão bibliográfica de estudos publicados nos últimos 21 anos (2000-2021), por meio de busca nas bases de dados: PubMED/MEDLINE, SciELO (Scientific Eletronic Library) e Google Acadêmico. Para a pesquisa, foram utilizados os seguintes descritores: Dente não Vital (Tooth, Nonvital), Pinos Dentários (Dental Pins) e Técnica para Retentor Intrarradicular (Post and Core Technique). Após criteriosa filtragem, foram selecionados 30 trabalhos para inclusão no estudo, além de 10 livros considerados relevan-tes para esta revisão. Resultado:Os PFVs demonstram excelentes propriedades estéticas, facilidade de execução da técnica e baixo custo, biocompatibilidade com tecidos dentais e perirradiculares, além de características biomecânicas vantajosas, o que resulta na trans-missão de menos tensão para a estrutura dentária, diminuindo a probabilidade de fratu-ras. Conclusão: As inúmeras vantagens e o excelente comportamento biomecânico desses pinos explicam seu destaque frente aos demais retentores intrarradiculares, sendo esses, quando bem indicados, a primeira opção para a reabilitação de dentes tratados endodonti-camente com extensas perdas coronárias.

Introduction: Every day, dentistry demonstrates great advances in techniques and materials applied to preserve the tooth structure. In this sense, fiberglass posts (FGPs) attract attention as an alternative to intraradicular posts for the rehabilitation of endodontically treated teeth with structural losses greater than 50%. Objective: Review the literature on aesthetic fiberglass posts, emphasizing their general aspects, properties, and biomechanical considerations. Material and Methods: A literature review of studies published in the last 21 years (2000-2021) through a search on the databases: PubMED / Medline, Scielo (Scientific Electronic Library), and Google Academic. The following descriptors were used: Tooth, Nonvital, Dental Pins, and Post and Core Technique. After careful filtering, 30 articles were selected for inclusion in the study, in addition to 10 books considered relevant to this review. Results: The FGPs demonstrate excellent aesthetic properties, eas-iness of execution and low cost, biocompatibility with dental and periradicular tissues, in addition to advantageous biomechanical characteristics, which result in the transmission of less stress to the tooth structure, reducing the probability of fractures. Conclusion: The numerous advantages and excellent biomechanical behavior of these pins explain their prominence concerning other intraradicular retainers, which, when properly indicated, are the first option for the rehabilitation of endodontically treated teeth with extensive coronary loss. Keywords: Tooth, Nonvital. Dental Pins. Post and Core Technique.

Pinos estéticos de fibra de vidro: técnicas e protocolos clínicos / Aesthetic fiberglass pins: techniques and clinical protocols

Introdução: Os pinos de fibra de vidro (PFVs) apresentam-se como uma alternativa prática e econômica capaz de reabilitar dentes endodonticamente tratados com perdas estruturais superiores a 50%. Objetivo: Realizar uma revisão de literatura sobre o protocolo clínico acerca da utilização dos PFVs, bem como explanar as diferentes técnicas que po-dem ser utilizadas para implementá-los. Materiais e métodos: Realizou-se uma revisão bibliográfica de estudos publicados entre 2000 e 2021 por meio da busca nas bases de dados: PubMED/Medline, Scielo (Scientific Eletronic Library) e Google Acadêmico. Para a pesquisa, foram utilizados os seguintes descritores: Dente não Vital (Non-vital Tooth), Pinos Dentários (Dental Pins) e Técnica para Retentor Intrarradicular (Post and Core Technique). Após criteriosa filtragem, foram selecionados 24 trabalhos para inclusão no estudo, além de 10 livros considerados relevantes para esta revisão. Resultados: Durante o diagnóstico e planejamento, é necessário avaliar determinados fatores para que se obtenha sucesso clínico, como: quantidade de estrutura dentária remanescente, posição dentária e forças oclusais recebidas e necessidades restauradoras e estéticas exigidas pelo caso e pelo paciente. Diante das particularidades de cada caso, o clínico deve selecionar entre as técnicas a mais ideal: Técnica do PFV direto/ técnica convencional; Técnica do pino de fibra de vidro anatômico; ouTécnica direta com PFV associado a pinos acessórios. Conclusão: A técnica do PFV apresenta passos clínicos simplificados e sua correta realização garante sucesso no tratamento. Diante de situações em que o PFV não apresenta correta adaptação, o clínico deve abrir mão da utilização da técnica convencional e utilizar as técnicas de personalização do PFV.

Introduction: Fiberglass posts (FPs) are presented as a practical and economical alternative capable of rehabilitating endodontically treated teeth with 50% structural losses greater than 50%. Objective: To review the literature on the clinical protocol for the use of FPs, as well as explain the different techniques that can be used. Materials and methods: A literature review of studies published between 2000 and 2021 was carried out through a search on the Scielo (Scientific Electronic Library) and Google Scholar databases. The following descriptors were used for the research: Non-Vital Tooth, Dental Pins, and Technique for Intraradicular Retainer (Post and Core Technique). After careful screening, we selected 24 papers and 10 books, considered relevant for this review. Results: During planning, it is necessary to determine specific factors for clinical success, such as the amount of remaining tooth structure, the tooth position and the occlusal forces received, and restorative and esthetic needs required by the case and the patient. Given each case's particularities, the clinician must select among the most ideal techniques: the direct FP technique/convention-al technique; the Anatomical fiberglass post technique, and the direct technique with FP associated with accessory posts. Conclusion: The FP technique has simplified clinical steps and its correct performance is successful in the treatment. Faced with situations in which the FP does not present adequate adaptation, the clinician must not use the conventional technique, using techniques for personalizing the FP.

Influência do tipo de cimento endodôntico na adesão de pinos de fibra de vidro: revisão de literatura / Influence of the type of endodontic sealer on glass fiber post adhesion: literature review

Introdução: Pinos de fibra de vidro são bastante utilizados quando dentes tratados endodonticamente apresentam grande perda estrutural e necessitam de suporte para a sua reconstrução coronária. A completa adesão do pino à parede do canal radicular é fundamental para o sucesso dessa restauração. Resíduos de cimento endodôntico que permanecem nas paredes dentinárias, mesmo após o preparo para a cimentação, podem interferir negativamente na sua adesão e contribuir para o seu deslocamento. Objetivo: O objetivo da presente revisão de literatura foi avaliar o efeito de diferentes cimentos endodônticos e o tempo decorrido entre a obturação e a cimentação do pino na resistência de união entre o pino e a parede do canal radicular. Métodos: Essa revisão de literatura incluiu 21 estudos que analisaram a influência de cimentos endodônticos na adesão de pinos de fibra de vidro, entre os quais 9 acrescentaram a variável tempo na sua análise, com pinos cimentados logo após a obturação do canal radicular e dias após a obturação. Resultados: Os dentes obturados com cimentos à base de resina demonstraram maior resistência ao deslocamento dos pinos durante os testes. Parece haver uma predominância de menores valores de adesão quando os pinos são cimentados imediatamente após a obturação com cimentos contendo eugenol. Conclusões: Os tipos de cimento endodôntico e o período entre a obturação e a cimentação do pino podem afetar a força de ligação entre a parede do canal radicular e o pino de fibra de vidro (AU).

ntroduction: Glass fiber posts are widely used when endodontically treated teeth present great structural loss and require support for coronal reconstruction. Complete adhesion of the post to the root canal wall is fundamental for the success of this restoration. Endodontic sealer residues that remain on the dentin walls, even after preparation for cementation, may negatively interfere with the adhesion and contribute for post displacement. This literature review evaluated the effect of different endodontic sealers and the time between obturation and post cementation on the bond strength. Methods: This literature review included 21 studies that analyzed the influence of endodontic sealers on the adhesion of glass fiber posts, among which 9 added the variable time in their analysis. Results: Teeth filled with resin-based sealers showed higher post push-out bond strength during testing. There seems to be predominance of lower adhesion values when the posts are cemented immediately after filling with eugenol-containing sealers. Conclusions: The type of endodontic sealer and period between obturation and post cementation can affect the bond strength between root canal wall and the glass fiber post(AU).

Influence of sonic vibration and cement type on the bond strength of fiberglass posts after aging / Influencia de la vibración sónica y el tipo de cemento en la fuerza de unión de los postes de fibra de vidrio después del envejecimiento

Introduction: This study evaluated the influence of sonic vibration and thermocycling on the bond strength of fiberglass posts using conventional dual-cured and self-adhesive resin cements. Material and Methods: Ninety-six single-rooted endodontically treated teeth were divided randomly into eight groups according to the cement used (dual-cured or self-adhesive resin cement), use of sonic vibration during post accommodation, and aging conditions (24h in distilled water or 5,000 thermal cycles). The fiberglass posts (White Post DC1, FGM) were cleaned with alcohol, treated with silane and cemented with dual-cured (Allcem Core, FGM) or with self-adhesive resin cement (seT, SDI). For groups in which sonic vibration was used, the posts were accommodated, and sonic vibration was applied for 10 s using a special tip placed on top of the post (Sonic Smart Device, FGM). Pull-out tests were performed after storage in distilled water for 24h at 37°C or after thermocycling (5000 cycles, at 5°C and 55°C). The results were evaluated using three-way ANOVA and Tukey's test (α=0.05). Results: Significant differences were not observed between the bond strengths of dual-cured (87.93±41.81 N) and self-adhesive cement (82.53±41.43 N). Bond strength for the sonic vibration groups (100.36±42.35 N) was significantly higher than for groups without sonic vibration (70.13±34.90 N). There were significant differences between specimens subjected to thermocycling (98.33±39.42 N) and those stored for 24h in distilled water (72.16±39.67 N). Conclusion: It can be concluded that both sonic vibration and thermocycling significantly improved bond strength of fiberglass posts with the two evaluated resin cements.

Introducción: Este estudio evaluó la influencia de la vibración sónica y el termociclado en la fuerza de unión de los postes de fibra de vidrio utilizando cementos de resina autoadhesivos y de curado dual convencionales Material y Métodos: Se dividieron aleatoriamente noventa y seis dientes tratados endodónticamente de raíz única en ocho grupos según el cemento utilizado (cemento de resina de curado dual o autoadhesivo), el uso de vibración sónica durante la acomodación posterior y las condiciones de envejecimiento (24 horas agua destilada o 5.000 ciclos térmicos). Los postes de fibra de vidrio (White Post DC1, FGM) se limpiaron con alcohol, se trataron con silano y se cementaron con cemento de curado dual (Allcem Core, FGM) o con cemento de resina autoadhesivo (seT, SDI). Para los grupos en los que se utilizó vibración sónica, se acomodaron los postes y se aplicó la vibración sónica durante 10 s utilizando una punta especial colocada en la parte superior del poste (Sonic Smart Device, FGM). Las pruebas de extracción se realizaron después del almacenamiento en agua destilada durante 24 horas a 37ºC o después del termociclado (5000 ciclos, a 5ºC y 55ºC). Los resultados se evaluaron mediante ANOVA de tres vías y la prueba de Tukey (α = 0.05). Resultados: No se observaron diferencias significativas entre las resistencias de adhesión del cemento de curado dual (87,93 ± 41,81 N) y el cemento autoadhesivo (82,53 ± 41,43 N). La fuerza de unión para los grupos de vibración sónica (100,36 ± 42,35 N) fue significativamente mayor que para los grupos sin vibración sónica (70,13 ± 34,90 N). Hubo diferencias significativas entre los especímenes sometidos a termociclado (98,33 ± 39,42 N) y los almacenados durante 24 h en agua destilada (72,16 ± 39,67 N). Conclusión: Se puede concluir que tanto la vibración sónica como el termociclado mejoraron significativamente la fuerza de unión de los postes de fibra de vidrio con los dos cementos de resina evaluados.

Effect of glass-fiber post on the biomechanical behavior of teeth with direct veneers / Efeito do pino de fibra de vidro no comportamento biomecânico de dentes com facetas diretas

Objective: This study aimed to evaluate the biomechanical behaviour of endodontically treated teeth with direct veneer that received or not intra-radicular glass fiber post by finite elements analysis. Material and methods: Six models were designed, varying the presence or absence of glass fiber post and the thickness of direct veneer (0.5, 0.7 and 1 mm). Tridimensional models of maxillary central incisors were obtained with CAD software, Rhinoceros 4.0, and transferred to CAE software, ANSYS 17.2, which a 100N load was applied in a 45° on the lingual surface to simulate functional movements. Geometry contacts were bonded, and the structures were isotropic, linear, elastics, and homogeneous. After coherence and convergence analysis of mashes, the chosen fail criterion was the maximum principal stresses. Results: For cement, glass fiber post, the stress distribution was similar independently of glass fiber post presence or veneer thickness. Models with glass fiber post had better stress distribution and lower values of maximum stress for inner dentin and veneers. Veneers with 0.5 and 1 mm had higher stress concentration areas. Conclusions: It can be concluded that glass fiber post is favorable for restored teeth with direct veneers, and very thin or very thick preparations can damage the biomechanical behavior of restorations.(AU)

Objetivo: Este estudo teve como objetivo avaliar o comportamento biomecânico de dentes tratados endodonticamente com faceta direta que receberam ou não pinos de fibra de vidro intrarradicular através de análise de elementos finitos. Material e métodos: Foram desenhados seis modelos, variando a presença ou ausência do pino de fibra de vidro e a espessura da faceta direta (0,5, 0,7 e 1 mm). Modelos tridimensionais de incisivos centrais superiores foram obtidos com o software CAD, Rhinoceros 4.0, e transferidos para o software CAE, ANSYS 17.2, cuja carga de 100N foi aplicada a 45° na superfície lingual para simular movimentos funcionais. Os contatos geométricos foram colados e as estruturas eram isotrópicas, lineares, elásticas e homogêneas. Após análise de coerência e convergência de malhas, o critério de falha escolhido foi a tensão principal máxima. Resultados: Para cimento e pino de fibra de vidro, a distribuição de tensões foi semelhante independentemente da presença do pino de fibra de vidro ou da espessura da faceta. Os modelos com pinos de fibra de vidro apresentaram melhor distribuição de tensão e menores valores de tensão máxima para dentina interna e facetas. Facetas com 0,5 e 1mm apresentaram maiores áreas de concentração de estresse. Conclusões: Pode-se concluir que o pino de fibra de vidro é favorável para dentes restaurados com facetas diretas, e preparações muito finas ou muito espessas podem prejudicar o comportamento biomecânico das restaurações.(AU)

Evaluation of Tensile Bond Strength of Metallic Prefabricated Posts Cemented with Different Luting Agents

Abstract Objective: To assess the tensile bond strength of prefabricated metal posts cemented with different luting agents. Material and Methods: Fifty single-rooted endodontically treated human teeth had their crowns cut, mounted into acrylic-resin blocks and then an 8mm depth post space were prepared. Prefabricated cylindrical metal posts were cemented using different luting agents: a zinc phosphate cement (SS White), a conventional glass ionomer cement (Vidrion C), two resin-modified glass ionomer cements (Vitremer and RelyX Luting 2) and a resin cement (RelyX ARC). Samples were stored in distilled water for seven days and then submitted to a tensile bond strength test until complete dislocation of the post. One-way analysis of variance and Tukey test for pairwise multiple comparisons were used to evaluate differences between luting agents. Results: Tensile bond strength was 563.88±203.41 N for zinc phosphate cement, 336.86 ± 137.64 N for Vidrion C, 515.24 ± 239.48 N for Vitremer, 828.47±433.99 N for RelyX Luting 2 and 1262.51 ± 356.29 for RelyX ARC. The Relyx ARC presented the highest tensile bond strength regard the luting agent tested (p< 0.05). Conclusion: RelyX ARC presented the higher tensile bond strength compared to the other luting agents evaluated.

Effect of Glass Fiber Post Diameter on Fracture Resistance of Endodontically Treated Teeth

Abstract Objective: To determine the fracture resistance of endodontically treated teeth restored with three different diameters of glass fiber posts and metal-ceramic crowns. Material and Methods: Thirty human maxillary canines were selected and subjected to root canal therapy. The teeth were randomly divided into three groups of glass fiber posts with 1.4 mm diameter (Group I), 1.6 mm diameter (Group II), and 2.0 mm diameter (Group III). The teeth were restored with metal-ceramic crowns and subjected to the compressive load applied at 45º angle to the longitudinal axis until fracture. The mode of failure was determined. Data were analyzed using ANOVA, followed by Tukey's post hoc multiple comparisons test (p<0.05). Results: The mean fracture resistance of groups I, II and III was 574 ± 91.2 N, 617 ± 85.21 N and 467 ± 99.43 N, respectively. No significant difference was noted between groups I and II, while the fracture resistance was significantly different between groups I and III (p<0.05) and groups II and III (p<0.05). No case of post fracture alone occurred in any group. Conclusion: The diameter of glass fiber posts can affect the fracture resistance of teeth. Based on the results, increasing the diameter of the post up to 1.6 mm may increase the fracture resistance of root, although excessive diameters are not recommended.

Operational specification for clinical use of dental intraradicular fiber post / 中华口腔医学杂志

Fiber-reinforced resin composite posts (fiber posts) are used extensively for the restoration of root-treated teeth with excessive loss of coronal structure. However, the longevity of a fiber post restoration still needs to be improved because of the various confounding factors that affect bonding procedures. Operational specification for clinical use of dental intraradicular fiber post was established based on the in-depth discussions by a panel of experts from Society of Prosthodontics, Chinese Stomatological Association. This specification should be helpful in standardizing the clinical technique of fiber post placement and improving the clinical longevity of a fiber post restoration.

Contaminated Dental Posts and Methods of Disinfection: A Systematic Review

Purpose: The aim of this study is to review the literature for the effect of contaminated posts on the outcome of endodontic therapy and to review the current recommendations available for posts disinfection protocols. Methods: An electronic MEDLINE and PubMed search was conducted using MeSH terms, and the references of the resulted articles were further reviewed for additional articles, eligibility criteria included any published article in a peerreviewed journal assessing posts for signs of contamination or reviewing protocols for posts disinfection prior to cementation. Findings: No articles met the eligibility criteria to be included in this review. Conclusion: There is a lack of evidence regarding the effect of contaminated posts on the success of endodontic treatments, and no protocols were found for disinfecting the posts prior to cementation.

Resistência à fratura de dentes tratados endodonticamente reforçados com pinos customizados de fibra de vidro e carbono / Fracture resistance of endodontically treated teeth reinforced with customized glass and carbon fiber posts

Objetivo: o objetivo do presente estudo foi comparar a resistência à fratura de quatro tipos de pinos intrarradiculares pré-fabricados: fibra de vidro, fibra de vidro customizado com resina composta, fibra de carbono e fibra de carbono customizado com resina, em dentes bovinos. Métodos: foram utilizados 60 dentes bovinos unirradiculares, que receberam tratamento endodôntico e foram divididos nos seguintes grupos: FV = pino de fibra de vidro; FVP = pino de fibra de vidro customizado; FC = pino de fibra de carbono; FCP = pino de fibra de carbono customizado; e Controle = restauração coronária com resina composta. Os dentes foram inseridos em blocos de resina acrílica, a 2 mm da junção amelocementária, simulando a interface dente-osso. Os espécimes foram submetidos ao teste de resistência à fratura em máquina de ensaio universal, sob uma carga de 0,5mm/min, até a fratura do corpo de prova. Os valores obtidos foram submetidos ao teste ANOVA, com pós-teste de Tukey. Foi realizada, também, uma análise dos padrões de fratura, por meio do teste Kruskal- -Wallis. Resultados: o grupo FCP mostrou os maiores valores de resistência à fratura, seguido pelos grupos FV, FVP e FC. O grupo controle mostrou menor resistência do que os demais, que receberam pinos intrarradiculares. Os pinos de FVP apresentaram o maior número de fraturas reparáveis, em contraste ao controle, no qual houve o maior número de fraturas desfavoráveis. Conclusão: o uso de pinos customizados reduziu a incidência de fraturas catastróficas. A ausência de pino intrarradicular ocasionou a maior incidência de fraturas irreparáveis. (AU)

Objective: The aim of this study was to compare the fracture resistance of four types of prefabricated intraradicular posts - glass fiber, glass fiber customized by composite resin, carbon fiber, and customized carbon fiber - on bovine teeth. Methods: Sixty bovine teeth were submitted to endodontic treatment and divided into the following groups: GF - glass fiber post; CGF - customized glass fiber post; CF - carbon fiber post; CCF - customized carbon fiber post; control - composite resin restoration. The teeth were embedded in acrylic resin blocks at 2 mm from the cement-enamel junction, simulating the teeth-bone interface. The specimens were submitted to a fracture resistance test in a universal test machine under a 0.5 mm/min load until the fracture of the specimen. The values obtained were submitted to ANOVA and Tukey tests. The analysis of the fracture patterns was performed by the Kruskal-Wallis test. Results: The CCF group presented the highest values of fracture resistance, followed by GF, CGF, and CF posts. The control group offered less resistance than the other groups that received intraradicular posts. The CGF presented the highest number of favorable fractures, in contrast to the control group, which presented the highest number of unfavorable fractures. Conclusion: The use of customized posts reduced the incidence of catastrophic fractures. The lack of intracanal posts led to a higher incidence of irreparable fractures (AU).

Stress analysis of maxillary central incisors endodontically -treated with varying ferrule heights and three different post dowel materials - a finite element analysis / Análisis de tensión de los incisivos centrales superiores tratados endodónticamente con diferentes alturas de férula y tres materiales diferentes de clavija posterior: un análisis de elementos finitos

Statement of problem : fracture of endodontically treated teeth is reduced by the use of a post with ferrule, but the effect of different ferrule configurations and dowel materials is not clear. Purpose: to evaluate the effect of ferrules with different configurations and heights on the stress of endodontically treated teeth restored with three different post and dowel materials. Materials and Methods: fifteen models of maxillary central incisors restored with porcelain fused to metal crowns were obtained using pro engineer software. the models were divided into three groups, each consisting of five models with ferrule heights of 0mm, 2mm, 4mm, 2mm with oblique fracture, 4mm with oblique fracture, the models under group GFR were restored with fiberglass reinforced post (GFR) and composite core build-up, group NiCr with a custom cast post metal alloy (NiCr), and group Zr with zirconia post (Zr) and composite core build-up. an oblique load of 100N and 150N at an angle of 135 degrees was applied to the palatal surface of the tooth, a vertical load of 100N and 150N at an angle of 90 degrees was applied to the incisal tip of the tooth. The maximum principal stress and the von mises stress was calculated for the remaining tooth structure and post apex using the finite element analysis (FEA) software. Results: the maximum von misses stress was observed in the apex of the post (p<0.05). Group Zr showed the highest mean stress (6.39Mpa) followed by group NiCr (5.65Mpa). There was a significant difference between post and between NiCr and Zr post for 2mm and 4mm ferrule height, while for 0mm ferrule there was a significant difference between the GFR and NiCr groups (p<0.05). Under oblique load, the maximum mean stress was observed in remaining tooth structures while for vertical load, it was observed at the apex of the post. Regarding ferrule heights, there were significant differences between 0mm-2mm, and 0mm-4mm uniform ferrule in post apex in the case of NiCr posts (p<0.05). Absence of ferrule resulted in higher stress for the NiCr group. Conclusion: higher loads that led to fracture were observed only at the apex of the post. Zirconia posts (group Zr) had higher fracture loads, whereas absence of ferrule resulted in higher fracture load with custom cast posts (group NiCr). Fracture thresholds were high on the remaining tooth structure for all the dowel systems especially for composite core build up irrespective of ferrule height and configuration. Clinical implications: appropriate selection of post and dowel materials in different configurations of ferrule heights ensures clinical success.

Indicación del problema: la fractura de los dientes tratados endodónticamente se reduce mediante el uso de un poste con férula, pero el efecto de diferentes configuraciones de férula y materiales de clavija no está claro. Propósito: evaluar el efecto de los casquillos con diferentes configuraciones y alturas sobre el estrés de los dientes tratados endodónticamente restaurados con tres materiales diferentes de postes y tacos. materiales y métodos: quince modelos de incisivos centrales superiores restaurados con porcelana fundida a coronas de metal se obtuvieron con el software Pro Engineer. Los modelos se dividieron en tres grupos, cada uno de los cuales consta de cinco modelos con alturas de casquillo de 0mm, 2mm, 4mm, 2mm con fractura oblicua, 4mm con fractura oblicua. los modelos del grupo GFR fueron restaurados con poste reforzado con fibra de vidrio (GFR) y acumulación de núcleo compuesto, grupo nicr con una aleación de metal de poste fundido personalizado (NiCr) y grupo Zr con poste de zirconia (Zr) y acumulación de núcleo compuesto. se aplicó una carga oblicua de 100N y 150N en un ángulo de 135º a la superficie palatina del diente. se aplicó una carga vertical de 100N y 150N en un ángulo de 90º a la punta incisal del diente. la tensión principal máxima y la tensión de von mises se calcularon para la estructura dental restante y después del vértice utilizando el software de análisis de elementos finitos (FEA). Resultados: el estrés máximo de von falta se observó en el vértice de la publicación (p<0.05). El grupo Zr mostró el mayor estrés medio (6.39Mpa) seguido del grupo NiCr (5.65Mpa). Hubo una diferencia significativa entre la publicación NiCr y Zr para la altura de la férula de 2mm y 4mm, mientras que para la férula de 0mm hubo una diferencia significativa entre los grupos GFR y NiCr (p<0,05), bajo la carga oblicua, la tensión media máxima en las estructuras dentales restantes, mientras que para la carga vertical, se observó en el vértice del poste. En cuanto a las alturas de la férula, hubo diferencias significativas entre la férula uniforme de 0mm-2mm y de 0mm-4mm en el post-apex en el caso de los postes de NiCr (p<0.05), la ausencia de férula dio como resultado un mayor estrés para el grupo NiCr. Conclusión: las cargas más altas que llevaron a la fractura se observaron solo en el vértice del poste; Los postes de zirconia (grupo Zr) tuvieron mayores cargas de fractura, mientras que la ausencia de férula dio como resultado una mayor carga de fractura con postes moldeados personalizados (NiCr de grupo). Los umbrales de fractura fueron altos en la estructura dental restante para todos los sistemas de clavijas, especialmente para la acumulación de núcleos compuestos independientemente de la altura y configuración de la férula. Implicaciones clínicas: la selección adecuada de materiales de postes y tacos en diferentes configuraciones de alturas de férulas asegura el éxito clínico.

Effect of Different Fiber Reinforcement Strategies on the Fracture Strength of Composite Resin Restored Endodontically Treated Premolars

Objective: To compare the effect of three different fiber reinforcement strategies on the fracture strength of composite resin restored endodontically treated premolars. Material and Methods: Seventy-two sound human premolars extracted for orthodontic reasons were divided into 6 groups (n=12) after endodontic treatment. Group 1: intact teeth (positive control); Group 2: endodontically treated teeth without restoration (negative control); Group 3: composite resin restoration; Group 4: placement of fibers at occlusal position; Group 5: splinting the buccal and palatal walls with horizontal fiber posts; Group 6: placement of fibers at the occlusal position after splinting the buccal and palatal walls with horizontal fiber posts. Then fracture strength was measured at a crosshead speed of 0.5 mm/min in a universal testing machine. Data were analyzed using one-way ANOVA and post hoc Tukey tests at α=0.05. Results: There were significant differences between the negative and positive control groups (p<0.001) and between the negative control group and all the other study groups (p<0.001). However, there were no statistically significant differences between the positive control group and all the experimental groups and between the experimental groups (p>0.05). Conclusion: Fiber insertion had no additional reinforcing effect on the fracture strength following composite resin restoration.

Irrigación del conducto radicular y tratamiento de superficie de pernos de fibra, previo a la cementación: revisión de tema / Root canal irrigation and fiber post treatments, before cementation: subject review

Introducción: el tratamiento endodóntico es muy solicitado para preservar las piezas dentales, así como la utilización de pernos de fibra cuando el remanente coronario no es el adecuado para recibir una prótesis coronaria, permitiendo de esta manera reconstruir el muñón dental para la posterior colocación de la restauración definitiva. Objetivo: identificar tanto el tratamiento de superficie de pernos de fibra como el irrigante radicular idóneos para conseguir una cementación adecuada; así como conocer cuál es el tratamiento de superficie que produce menos desintegración de las fibras del perno de fibra. Materiales y métodos: se incluyeron 47 artículos publicados en inglés, durante los últimos 20 años, teniendo en cuenta que los mismos se obtuvieron hasta octubre del 2018. Conclusiones: previa la cementación de pernos sean estos de fibra o de cuarzo es indispensable realizar tratamiento de superficie para así mejorar la adhesión, estos pueden ser químicos o físicos, los que ofrecen mejor resultado sin alterar de manera significativa la estructura del mismo es el enarenado con partículas de diamante sintéticas de 1-3 µm seguido de silanización y dentro de los químicos H2O2 al 10% por 1 min seguido de silano. Para obtener mejores resultados se debe accionar el silano a una temperatura de 80°C. En cuanto a protocolos de irrigación depende del sistema de cementación que se vaya a emplear EDTA 18% + Hipoclorito de sodio al 5,25% o EDTA 18% + clorhexidina al 2% cuando se va emplear un cemento autoadhesivo y NaOCl al 11% cuando se utilice el acondicionamiento ácido de lavado y secado.

Introduction: nowadays the aim is to keep the dental organ in function as long as possible, in many cases the endodontic treatment is used to preserve the dental pieces; and the use of fiber post when the coronary remnant is not adequate to receive a crown prosthesis, allowing us in these cases rebuilt the thoot for the subsequent placement of the final restoration. Objective: to identify wich is the better surface treatment of fiber post and the root irrigator for adequate cementation; as well as know, which is the surface treatment that produces less fibers' disintegration of the fiber post. Materials and methods: it were included 47 articles published in English, during the last 20 years, considering that they were obtained until October 2018. Conclusions: Before posts cementation are these fiber or quartz it is indispensable to carry out the surface pretreatment to increase adhesion, the same ones that can be chemical or physical within these that offer the best result it is the sanded with particles of diamond synthetic of 1-3 µm followed by silanization and with 10% H2O2 for 1min followed by silane. For better results silane must be dryed at a temperature of 80 °C. And for irrigation protocols depends of the cementing system to be used EDTA 18% + sodium hypochlorite 5.25% or EDTA 18% + 2% chlorhexidine when a self-adhesive cement is to be used and 11% NaOCl when washing and drying acid conditioning is used.